April 15th, 2018 by David
Paddle-sailing is a recreational activity like few others. Combining the propulsion of paddle and sail enables us to go further faster, accessing previously inaccessible waters, while enjoying two sports at once!
Modern sailboats are very efficient at harnessing the energy of the wind, but one of the frustrating aspects of a sail-only craft is that when the wind dies, so does the vessel’s speed. Luckily as paddle-sailors, when the wind lessens, we can simply start paddling.
Exercise is of course a good thing, but efficiency and technique definitely have their advantages. Less fatigue, greater distances traveled, and higher sustained speeds are just a few of them.
Before we get into all the tips, it should be noted that there are no rules here. Ultimately, paddle-sailing should be about enjoying the wind and the water. If your boating goal is simply to relax – maybe do some quiet birdwatching and meander around a small body of water – the following may not be so useful. But If you want to improve your paddle-sailing skills, the following tips might help.
As a preface, it’s important to understand a little bit about a boat’s inertia and momentum and about the forces that move a boat and slow it down. At the risk of triggering Physics 101 flashbacks, inertia is a term which refers to how easy or difficult it is to change the speed or direction of an object. Once that object is moving, its momentum determines the amount of friction force required to slow down and come to a stop. Also, it helps to know that applying a force to an object will move it, and that the force of friction will act to slow it down.
Weight plays an important role. Heavy (high inertia) objects require more force to be applied to them to speed up and slow down. For example, a super heavy vessel like an oil tanker requires an amazing amount of force and time to get up to speed, as well as to slow down. Modern large ships may require as much as five miles to stop, even with their engines in full reverse! Wow, think about that for a moment.
Lightweight (low inertia) objects can speed up and slow down quickly and easily. Have you ever seen an Olympic canoe event, or a world class rowing race? These boats are so light, and the paddlers/rowers so strong, that the boats jolt forward with each stroke. They visually slow down each time the paddle leaves the water, making them have a pulsing “go-slow-go” motion that not only looks bizarre but can make for some pretty exciting finish line action!
Since kayaks are some of the lightest production boats around, they have relatively low inertia and slow down quickly, easily succumbing to the frictional drag created from interaction with the water, as well as from the air when sailing upwind.
As a side note, there is a common misconception out there that lightweight boats have a faster overall speed compared with equally shaped heavier boats. While it’s true that a lightweight boat will require less force and physical energy to build speed and momentum, heavier boats tend to hold their momentum better, allowing them to cut through the chop and maintain their speed better. The reality is that a kayak’s top end speed (or hull speed) is ultimately dictated by the boat’s waterline length, underwater shape, and total wetted surface area, not by its weight.
So what does any of this have to do with paddle-sailing technique? By knowing how an object (in this case our kayak) behaves, we can better understand what we can do to efficiently move it through the water.
Which leads us to:
Tip #1. When that wind puff that was moving your kayak so nicely through the water suddenly goes away, it makes sense to start paddling before the boat slows and loses momentum.
A kayak (like any object) requires more energy to accelerate it than to maintain its speed. This is one of the reasons why cars use more fuel when city driving compared with highway driving. In order to conserve energy it makes sense to provide the boat with nearly constant propulsion forces and not let it slow down too much.
Tip #2. Use your paddle and the sail together to build momentum to reach a cruising speed, then let the sail take over to help maintain that speed.
This not only reduces the time required to get up to cruising speed, but helps with the efficiency of the sail(s) by generating “apparent wind” (the moving air created by the boat moving forward), and this additional wind can help the sails move the boat.
Since a kayak without outriggers has a relatively slender form, it lacks the stability needed to take a large sail plan and must therefore rely on smaller sails to get the job done. This means that anything the paddle-sailor can do to increase the sail’s efficiency will be beneficial.
Tip #3. Try to keep the boat relatively flat in the water when paddle-sailing.
A flat (non-heeling) boat is easier to paddle with a double bladed paddle. In addition, having a flat boat positions the sails so they remain perpendicular to the wind flow. This allows the sail’s foil (wing-like shape) to more efficiently produce lift, and this lifting force is what pulls the boat forward through the water.
Tip #4. Unless you are surfing wind swells and chop (sailing downwind), flat water will allow you to sail faster.
“Choppy” water has a surface composed of lots of small rough waves. Wind swells are larger waves spaced farther apart. Cutting through chop and swell reduces the boat’s speed and therefore its momentum. Every time the bow plunges through a wave, the part of the bow that was previously above the waterline is now creating frictional drag in the water, slowing you down. For fast and efficient upwind sailing, it’s best to look for flat water. That said, downwind wave surfing can produce some of the fastest speeds in a kayak. This is mainly due to the effect of harnessing the energy and speed of the forward moving wave which is then added to the boat’s forward speed.
Tip #5. The best wind speed for sailing upwind is less than fifteen knots (small or no whitecaps present). And the ideal wind speed for windward sailing is probably somewhere between ten and twelve knots (just before whitecaps develop).
The reason is twofold. First, friction created by our bodies, the boat, and the rig in the wind, slows upwind progress. Second, the waves slow the boat down and kill momentum. While we did what we could in the rig’s design to reduce its frictional profile in the wind, when it comes to our body size there is little we can do to (except maybe go on a diet). Basically, when we hold an upwind course we are required to fight against both the wind and sea.
Even though the Kayaksailor’s sail shape is efficient at generating pulling force, its small size limits how much it can do. In strong winds of over 20 knots (large, frequent white caps are present), paddling while sailing with the leeboards in their full down position is usually the best way to maintain cruising speeds to windward.
Tip #6. Lean your torso out to windward to compensate for heeling, instead of bracing with your paddle to leeward.
Normally a kayaker will brace with their paddle, essentially pushing it against the water’s surface, to prevent the boat from capsizing. While this works fine for downwind sailing when the boat isn’t heeling (leaning over), it doesn’t work so well on a beam or close reach when the side force of the wind causes the boat to heel. The reason has to do with the position of the sailor’s torso when bracing. The weight of one’s torso is used as a counterbalance to offset the heeling forces of the sail, and, leaning one’s torso to windward is one of the best ways to prevent capsizing.
That said, at some point one’s torso weight may not be sufficient to prevent further heeling. This is the time when un-cleating and easing the mainsheet is needed to spill power from the sail and allow the torso to be a more productive counter balance.
You might ask, Why not ease the mainsheet in the first place? While this is an option, leaning one’s body out to windward will preserve the pulling power in the sail, resulting in faster boat speeds.
The reason we don’t want to paddle-brace to leeward is that our torso weight moves in the wrong direction, essentially helping the sail heel the boat over. Doing this results in an awkward situation where the paddle-brace becomes ineffective. It also slows the boat due to the paddle blade’s friction in the water. In short, save paddle-bracing for those exciting downwind legs.
Tip #7. Try a series of broad reaches instead of a run.
Just like many catamarans, the Kayaksailor rig doesn’t have a backstay. Instead, the shrouds (side stays) are positioned aft of the mast not only to give the mast aft support, but to provide the forestay adequate tension to allow the leading edge of the genoa to have the correct shape. The aft shroud placement creates a situation where, on a direct downwind leg, or “run,” the lower part of the mainsail will rest up against the leeward shroud and lose its curved shape. Also, the sail can’t be completely let out perpendicular to the wind, which is the most efficient sail position for running.
Like for catamarans, the answer is to angle off slightly from a directly downwind run, onto a deep broad reach, and sheet in the main so that it is just brushing the shroud. This will allow better boat speeds, not only because of the better sail shape, but because the leeboards will now be engaged.
The resistance of the leeboards to move sideways in the water, and the sideways pulling force of the sail work in conjunction with each other to move the boat forward. This forward speed makes apparent wind, which allows the sails to interact with more total wind, generating more pulling power, leading to even faster speeds.
The genoa also works better when it is not completely blanketed by the main, as it is on a run. Of course sailing a series of broad reaches means more jibing, so having your jibes down will be important. If you haven’t read it yet, here is a blog post I wrote on jibing technique.
Tip #8. When reefing out on the water, point the bow downwind. When shaking out the reef, point the bow upwind.
Most sailboat sailors will point their boats directly into the wind to “reef” (make the sail smaller). With the Kayaksailor, it’s usually easier to reef with the bow pointed directly downwind. The reason is that since the kayak is a low inertia boat, when pointing it into the wind, the forward speed will quickly decrease to a stop, and the bow will naturally turn off the wind. This allows the sail to power up and become unmanageable before the reefing knots can be tied.
This powered up situation can be frustrating, and a little scary too. Holding a powered up sail in a strong wind is a good way to capsize. By pointing the bow directly downwind, one’s body will block the wind from the now smaller sail, making it relatively easy to grab the boom and gather the sail together. This downwind position also allows more time to tie the quick release knots in the reefing lines. Just be aware that while pointing downwind the boat will want to speed up, so make sure there is enough water in front of the boat to get the job done.
In very strong winds it’s much easier to reef on shore or in a protected cove where the wind is lighter. Also, if you are just launching and it looks pretty windy out there, consider reefing before heading out. It’s quite a bit easier to “shake out” (untie) a reef, than it is to reef down. Shaking out a reef should be done with the bow pointing into the wind, since it’s just a matter of pulling on the tag end of the quick release knots and then quickly raising the halyard. Raising the halyard is always easier when the boat is into the wind.
Tip #9. Always raise and lower the mast as quickly as possible while pointing the bow directly into the wind.
Quickly raising or lowering the mast while pointing directly into the wind is important to prevent mast track stress. The shrouds and forestay support the mast when it is in the full upright position, but when the mast is halfway up or halfway down, it is unsupported except for the minimal support provided by the mast car and track. This halfway zone is the most vulnerable position for the mast track. Pointing directly into the wind and acting quickly will keep the track in good shape.
Tip #10. Keep the mainsheet on your lap at all times.
Paddle-sailing requires that the mainsheet be cleated so one’s hands can be on the paddle. If a strong wind gust hits, and the main needs to be eased to prevent capsize, having immediate access to the sheet is critical. One’s lap is a pretty good place to keep the sheets.
That said, when it’s really windy and one is paddle-sailing to windward, it can be helpful to hold the main sheet between one’s hand and the paddle shaft. This way that fraction of a second needed to grab the sheet from one’s lap will be eliminated allowing for a more rapid response. Windward paddle-sailing in strong gusty conditions can be tricky since the mainsail is normally tightly sheeted in, and this puts the kayak at greatest risk for excessive heeling and capsizing. So it’s smart to have the mainsheet ready at hand.
Tip #11. In strong winds, pull in the main sheet prior to tacking.
This can prevent the mainsheet from getting wrapped in the goalposts. Most of the time the main sail will already be sheeted in prior to coming about since it is likely that the boat will already be on a close reach as one initiates the tack. But situations may occur when one paddles into the wind from a beam or broad reach and the sheet is loose. This makes it possible for a hard wind gust to blow the sheet back around the goalposts. If this happens, don’t worry, simply uncleat the sheet and release the wrap with your paddle blade. But it’s better to avoid the situation altogether by simply sheeting in prior to tacking.
Tip #12. Backwinding the genoa will help speed up your tack.
In other words, when coming about, or “tacking,” if one waits to release the genoa sheet from the cleat until the mainsail fills with wind from the other side, the now backwinded genoa will help drive the bow away from the wind and onto the new tack. It can be helpful to listen for the main’s battens “pop” to the other side and use it as an audible cue to release the genoa and sheet it on to the new side.
This is another maneuver that kayak-sailors share with catamaran sailors. Like many beach cats, kayaks lack the adequate inertia, as well as maneuvering ability to quickly pivot through a tack. Cat sailors frequently use a backwinded headsail to drive their boat onto the new tack.
Another advantage of backwinding the genoa is that it helps to prevent the knot in the Kayaksailor’s genoa sheet from getting caught in the mast car.
Tip #13. Try not to “choke the slot” with the genoa.
What the heck does that mean? Over-sheeting (over-tightening) the genoa sheet not only flattens the genoa to the point where the curve in the sail, or “draft,” which is responsible for generating power, goes away, but it can also restrict the air flow around the lee side, or low pressure side of the mainsail, reducing its efficiency. The resulting narrow, vertical gap or “slot” between the genoa and mainsail restricts the air flow between the two sails, and so is called “choking.”
So how do you know when your rig’s slot is choked? While it’s relatively easy to check the trim of the mainsail by observing the tell-tales and making sure they are flying together, it’s very difficult to see the genoa at all because the mainsail is blocking the view. If the boat feels like it’s going slower than it should, re-trimming the genoa might be all that is needed to open the slot and generate some speed. Try easing the genoa sheet until the genoa “luffs,” or flaps in the wind, then pull the sheet in just until the flapping stops. If you are not sure whether or not you sheeted it in too much, or if you change course, simply repeat the process by letting out and re-trimming. This technique works well in winds above five knots, but in very light air one may not be able to hear the sail luffing. In this case, simply grab the end of the boom and momentarily move the mainsail out of the way for a better view to see if the genoa is luffing.
Tip #14. Insert the leeboard pushrod into the forward facing hole on the leeboard head.
This will likely help with your paddle stroke. If you want to make more room under the boom for your paddle blade, simply insert the leeboard control rod into the forward end of the leeboard head. This allows the fiberglass leeboard rod to lay against the foredeck instead of sticking up in the air and getting in the way. Kayaksailor owners have been doing this for years, and it definitely allows for a cleaner paddle stroke. Here is an old blog post on the topic.
Tip #15. Practice using a low angle paddle stroke.
A less vertical, or “low angle,” paddle stroke works well with the Kayaksailor. The reason is that one is less likely to hit the leech (back edge) of the main sail with end of the paddle blade that is out of the water. Many paddle manufacturers make low angle paddles. These typically have slightly longer shafts and smaller, narrower blades. The narrow blades also make them easier to fit between the boom and the foredeck during the power stroke. We like using ultra-skinny Aleutian Island style paddles, but most low angle paddles will work well.
Hopefully these tips will help to improve your paddle-sailing skills.
Please feel free to leave a comment.
Fair winds and happy paddle-sailing!
June 29th, 2017 by David
Have you ever capsized a kayak?
If so, you know that reentering your boat is an important skill to master. In fact, it can save your life. Even while wearing a good drysuit, prolonged immersion in cold water will eventually lead to hypothermia; therefore reentry speed is important. In warm water, speed isn’t as critical, but most will agree that getting into their kayak quickly is a good thing.
The problem for many is that reentering from the water isn’t the easiest skill to master. Young, lightweight people often seem able to hop into their boats with very little effort, while older, heavier kayakers can struggle with the reentry maneuver. So, what’s the answer?
First, it’s important to understand the best way to reenter your specific kayak and practice this technique in a variety of sea conditions. Some kayaks are easier to get into than others. Remember that getting into your kayak on a warm summer’s day when the water is flat calm is one thing, but doing so on a cold, windy autumn day, in adverse sea conditions, is something altogether different.
Secondly, it’s helpful to use any tools available to speed up the reentry procedure. Three of these include paddle floats, paddle float rescue straps, and the reentry stirrup.
These tools can be especially useful in cases of injury or pain. Shoulder pain is all too common among avid kayakers and any device utilized to help get back into one’s boat is a valuable one.
Different style boats often require different reentry techniques. Sit-on-tops and inflatables are typically very stable craft and not prone to capsizing. So it shouldn’t come as a surprise to learn that many owners have never contemplated how, or even if, they can get back into their boats from the water.
The most common reentry procedure for sit-on-tops and inflatables involves flipping the boat to the upright position, reaching across the middle of the boat, grabbing the gunwale or carry handle on the far side, tilting the kayak up, and doing a scissor kick with one’s legs while simultaneously pulling oneself up and onto the boat. One usually ends up on one’s belly in the cockpit and then turns over in order to sit in the seat.
While most kayakers, with a little practice, can perform this sit-on-top reentry procedure relatively quickly, many people, especially those of us who are older, overweight, or lacking in arm or leg strength, find this maneuver exceedingly difficult, even unmanageable.
One solution is to use a rescue stirrup, with or without a paddle float.
A rescue stirrup is a simple adjustable piece of webbing or line, with a clip (or other method of attachment) on one end, and makes a loop, or “stirrup”, for your foot. It’s simple to use. Just attach it to the middle of the boat near the cockpit, and while in the water, insert your foot in the stirrup, and step up to help lift yourself into the boat. The stirrup is used in place of the scissor kick and it can make it much easier to get on board.
For sit-on-tops, the carry handles commonly located on the gunwales make convenient attachment points.
The paddle float is another self-rescue device. It’s basically a flotation device (either inflatable or made of foam) designed to attach to one end of the paddle.
The other end of the paddle can then be temporarily attached to the kayak with a rescue strap, resulting in something like an outrigger to stabilize the kayak during reentry. Paddle floats are standard equipment on narrow “tippy” sea kayaks, but can also be used effectively on more stable craft like recreational sit-on-tops, folders, and inflatables.
Rescue straps hold the paddle securely in position behind the cockpit, allowing for one of the most stable methods of paddle float reentry.
The straps can be easily adjusted to accept different width paddle blades.
And, cleverly release to free the paddle.
There are several excellent techniques for doing a paddle float reentry without securing the paddle to the boat (see YouTube), but in my mind the best and easiest method employs securing the paddle with a locking device such as the rescue strap.
Bungee cords commonly found on the aft decks of most sea kayaks are often used to help hold the the paddle during a paddle-float reentry but they are not very secure and allow the paddle to easily move out of position. Paddle float rescue straps are easy to use, hold the paddle to the boat securely and allow the use of both hands to be used during reentry.
Now let’s consider recreational sit-inside kayaks. While sit-on-tops and inflatables are some of the easiest kayaks to reenter, recreational sit-inside kayaks, especially tandems with their large cockpits, can be quite challenging to do a self rescue with.
Because of their big open cockpits and minimal, sometimes absent, bulkheads, these boats can take on a ton of water during a capsize. The result is that once righted they sit very low in the water.
Intuitively, this might seem like a good thing as one would think they would not have as far to go to get into the boat. But the reality is that a swamped kayak settled low in the water is very unstable and can be frustratingly difficult to maintain upright. This is perhaps one reason why sit-on-tops have gained so much in popularity in recent years.
Using a paddle float with a pair of rescue straps is a great way to reenter and self-rescue a large cockpit, recreational, sit-inside kayak. Not only will the outrigger technique stabilize the craft, but it will allow the cockpit to remain relatively level while bailing out all that water. Bailing wide, large cockpit boats is normally done with a hand pump, a hand bailer, or a small bucket.
Hand bailers can move allot of water quickly. Consider experimenting with different bailing devices and use whatever works best. It’s always a good idea to keep multiple bailing devices on board, and remember, leash them to the boat! They won’t work if they’ve floated away.
For reentering a narrow touring kayak such as a sea kayak, paddle floats, rescue straps, and rescue stirrups can all be extremely useful. As mentioned, paddle floats are standard safety equipment for sea kayaks (also known as touring kayaks). While most sea kayak purists advocate mastering at least one roll recovery technique (think Eskimo roll), the fact is that most people who own sea kayaks are not able to execute a reliable roll. In my opinion, all owners of touring style kayaks should seriously consider having reentry devices on board. At a minimum, a paddle float and a pair of rescue straps. Even with a reliable roll down, exiting the cockpit is always a possibility. And, this is especially true for kayak-sailing where it’s the norm to exit the cockpit in the event of a capsize.
Most reputable sea-kayak tour operators require that self-rescue reentry devices be carried on board their kayaks, and we would all be wise to do the same.
So, whether you are an accomplished kayaker or a novice, have a performance high-end boat or a Walmart special, being able to reenter your boat from the water is paramount for safety. We should all know the best reentry technique for our specific craft, practice it often, in a variety of conditions, and use any reentry tools necessary to get the job done quickly.
The reentry tools described above should be found at all good kayaking shops. We offer the rescue straps and rescue stirrups here on the website for your convenience. 🙂
I hope this post proves to be informative. Please feel free to leave a comment.
February 7th, 2017 by David
Just want to share with you this little video collage put together from our library of clips. As you probably already know by now, Patti and I routinely bring our cameras along with us when we head out on the water, and while it’s always super-fun to sail together and capture the moment, it’s even more fun to review the footage later and relive those special moments. We hope you enjoy watching it! Let’s go sailing!
July 21st, 2016 by David
Six Ways of Steering Your Sailing-Kayak
Six, really? Yep… and perhaps with a better understanding of quantum physics we’ll even find a few more, but for now six is all I can come up with.
While an entire book can be written on the topic of steering a sailing-kayak, I’ll do my best to keep this as short as I can and at the same time try not to leave anything out.
First, you should know that in order to have a nicely steering kayak one should begin with having a balanced boat. I’m referring to fore-and-aft balance, and if you would like to learn more about this topic here is a blog post on the subject.
Steering a sailing kayak is nearly identical to steering a non-sailing kayak. The only difference is well… the sailing aspect. And because sailors are always thinking about the wind, they think of steering in this way as well. A non-sailing kayaker might say “let’s turn into that bay” While a kayak-sailor might say “Let’s reach upwind and then bear-off into that bay.” The motion of the craft is nearly always considered in relation to the wind, either upwind or downwind. So keeping this in mind, let’s get down to the nitty gritty:
There are six basic ways to steer your kayak: (1) paddle steering, (2) rudder steering, (3) hull steering, (4) leeboard steering, (5) skeg steering, and (6) sail steering.
These can be classified into four categories: Steering that moves the boat by redirecting water around blades. Steering that changes the “footprint” that the boat makes in the water. Steering that moves the location of the boat’s center of lateral resistance. And, steering that moves the center of effort in the sails.
Sounds a bit complicated, but it isn’t. It’s easy!
Let’s begin with steering that moves the boat by redirecting water around blades. (1) Paddle steering and (2) rudder steering both fall into this category. Paddle steering a sailing kayak is probably the most common method of steering and is accomplished using two basic strokes, the forward sweeping stroke and the stern rudder stroke. For upwind sailing rigs like the Kayaksailor with leeboards near the bow, the bow rudder stroke is less effective, so I won’t go into it here.
To perform the forward sweeping stroke, simply reach forward, insert the paddle blade alongside the hull, sweep it out and back in a wide arc. This will have the effect of pushing the bow in the opposite direction of the sweep. So, in order to move the boat to the left, make your sweep on the right side of the boat; and to move it to the right, sweep on the left. Even though sweeping strokes are very effective, you may need to use multiple strokes to get the job done.
Here I am initiating for a forward sweeping stroke on the right side of the boat in order to move the bow to the left.
To perform a stern rudder stroke, simply insert your paddle blade in the water alongside the stern and angle it so that water is being directed away from the stern. In contrast to the forward sweep, you will want to put the blade in the water on the same side as the turn, meaning that if you want to turn left, put the blade in the water on the left side of the stern. Generally, only one rudder stroke is needed to alter the boat’s direction. And for the stroke to be effective, the boat needs to be already moving forward.
In this early Kayaksailor photo, Patti is not only adjusting the brim of her hat, but she is also using a stern rudder stroke to steer her boat downwind. Notice that the paddle blade in the water is behind her and on the downwind or “lee” side of the boat.
An important difference between the two strokes is that a forward sweeping stroke will generate forward boat speed, while a stern rudder stroke will create drag and slow the boat down. For this reason paddle-sailors often use sweeping strokes while sailing to windward when forward efficiency is most important, and rudder strokes while sailing off-the-wind when boat speed comes more easily. A rudder stroke can also be quite effective for very tight turns, as well as for slowing the boat down to avoid collisions. It’s also a useful method for initiating a jibe.
Next is rudder steering. Rudder steering is probably the easiest method of steering so I won’t spend too much time on it here. Basically if your boat has a rudder installed, pushing on the right foot pedal will turn the rudder and make the boat will go to the right, and pushing on the left pedal will make the boat will go the left. Simple. Like the stern rudder stroke, forward motion is necessary to make the boat turn. And, also like the stern rudder stroke, pushing it too hard will create excessive drag and slow the boat down. For this reason, employing small rudder movements are preferred for small course corrections. But reducing speed isn’t always a bad thing, especially for collision avoidance, so if you really need to slow down, by pushing the rudder all the way from side to side it will act as a water-brake and will help to slow forward motion.
The next type of steering is one of the most useful methods, yet least understood by the novice paddler. I’m referring to (3) hull steering. Hull steering is remarkably simple. You lean the boat in the opposite direction of the turn. Want to go left? Lean the boat to the right. Want to go right? Lean the boat to the left. Easy. Like using a rudder or performing a rudder stroke, the boat needs to be moving in order for the boat to turn.
Most sailboat sailors know that when a sailboat is heeled over excessively it wants to turn away from the heel and round up into the wind. Hull steering is one of the main reasons for this.
Some boats hull steer better than others, and to explain why, it’s important to understand how hull steering works. It works by changing the shape of the boat’s footprint in the water. Since most kayaks, and sailboats for that matter, have narrow bows, wider middles, and narrow sterns, they create a footprint in the water that looks something like this:
(Please excuse the crude diagram.)
A boat will make this symmetrical shape as long as it is sitting flat in the water. And when the water moves around this footprint, it will move symmetrically around the curves on each side, allowing the boat to travel in a straight line.
What happens when you lean the boat to the right, is that the footprint in the water will change to look something more or less like this:
Now the footprint takes on an asymmetrical shape with the right side maintaining the hull’s curved shape, while the inside changes to more of a straight line. An asymmetrically curved shape like this wants to move through the water in the direction dictated by the hull’s curve. In this case to the left.
Here I am demonstrating a sharp left turn by significantly leaning my kayak to the right.
Below is what the footprint looks like when the boat is leaned to the left:
Of course now the left leaning boat will make a footprint curve that curves to the right and so the boat will want to steer to the right.
Here Patti executes a subtle right turn by gently leaning her kayak to the left.
A tip for aggressively hull steering in gusty wind conditions is to always lean the boat (and your body) away from the sail. This puts your body weight in a better position to counter balance the sudden heeling force in the sail.
It should now make sense that the very best hull steering boats have very curved hulls. I like to think of these as “feminine” boats, boats with “hips.” Some of the worst hull steerers are the masculine ones with long, nearly straight sides. Though this type of hull can be quite fast, it can also be very difficult to turn.
Let’s move on to methods of steering that change the boat’s center of lateral resistance. (4) Skeg steering and (5) leeboard steering fall into this category. First let’s look at skeg steering.
A retractable skeg is a non-turning fin normally located under the stern. It is typically found on sit-inside touring kayaks, but can also be found on some recreational kayaks. There are two types of skegs, fixed and adjustable. The adjustable skeg retracts up inside the hull, and since these are the most useful for steering we will concentrate on this type.
The photos below shows a skeg both retracted and deployed.
But before we delve into how to skeg steer, it’s helpful to understand the concept of a boat’s center of lateral resistance.
The following is a simple way to visualize it; Imagine yourself standing in knee deep water, and with one hand, you push your kayak sideways through the water. Suppose that the boat is moving perfectly sideways, with the bow and stern traveling exactly the same distance; That exact place where your hand touches the boat is just above the boat’s center of lateral resistance. If instead you were to have put your hand closer to the bow and pushed, the bow would have moved farther than the stern, and therefore your hand would have been forward of the boat’s center of lateral resistance.
Now, instead of you pushing sideways on the boat, imagine the wind is pushing sideways on the boat and you are sitting in the cockpit. If you were to drop a skeg down into the water under the stern, what would happen is that since the skeg has its own lateral resistance, the boat’s overall resistance would be shifted back toward the stern and the bow would be pushed downwind.
So, basically, the way to skeg steer is to drop the skeg down when you want to turn the boat downwind, and to raise it up when you want to steer upwind.
Most retractable skegs have a sliding control knob along side the cockpit, allowing for precise control of how much skeg extends down into the water.
On a balanced kayak, it usually takes only a small skeg adjustment down to make the boat turn downwind. It should be noted here that if you have both a skeg and a rudder, as we do on our composite boats, having the skeg too far down will reduce the efficiency of the rudder because it keeps the stern from moving sideways.
Next is leeboard steering. This too changes a boat’s center of lateral resistance, except in this case instead of the adding resistance to the stern with a skeg, you are now adding it forward on the bow. By dropping the leeboards down, the bow will be prevented from sliding downwind.
So if you want to turn downwind, raise the leeboards up a little, and if you want to turn upwind, lower them down.
Balancing your leeboards to the sail is very important for upwind kayak-sailing, so if you haven’t read the post “Balancing the Leeboards” yet, please take a moment to read it.
The sailor above has his leeboards mostly down and is in the process of slowly turning upwind.
For sailing downwind, you can even raise the boards up and out of the water completely and still maintain directional balance, as our friend Dan demonstrates.
Finally, the last type of steering, (6) sail steering, is steering that moves a sail’s center of effort. This steering method is used on boats with fore and aft sails, and, in the case of the Kayaksailor is only used when the rig has the genoa added. By trimming each sail independently, the overall sideways pulling force in the sails can be moved either in front of or behind the leeboards. Unbalancing the rig in this way will turn the boat either downwind or upwind.
So, for instance, if you are on a beam reach with the wind coming from the side and your sails both have wind in them, by loosening the mainsheet and spilling all the power from the main, the genoa will now have all the power, and because the genoa is located forward of the leeboards, it will pull the bow downwind.
In general, if your intention is to turn downwind, try easing the mainsheet. Conversely, if you want to turn upwind, loosen the genoa sheet and spill all the power from in front of the leeboards. Now the mainsail’s power will be aft of leeboards, causing the stern to slide downwind, allowing the bow to head up into the wind.
Sail steering only works when the wind is coming over the side of the kayak and works on some points of sail better than others. It is very effective on a beam reach, mostly effective on a close reach, not so effective on a broad reach, and doesn’t work at all on a dead run.
Patti is seen here sailing her self built skin-on-frame Greenland kayak, effortlessly steering without skeg or rudder.
So now that you know the six different ways of steering — paddle, rudder, hull, leeboard, skeg, and sail — you have six useful tools at your disposal to make your boat turn.
While any one of these can make a boat change direction, an experienced kayak-sailor will often use combinations of these tools to efficiently steer their craft. What combinations work best for you and your boat is up to you to find out.
Fair winds and happy sailing!
Please feel free to leave a comment.
For Kayaksailor inquiries please contact us via e-mail email@example.com
October 27th, 2015 by David
Kayak-sailing 102 Load Balance And Directional Stability.
Prerequisite for this class is Balancing the Leeboards.
Most people are aware that placing weight in the very bottom of a boat acts as ballast and stabilizes a craft, and that adding a weight high above the waterline will make the boat less stable, but it is not so widely understood how the distribution of weight fore and aft affects the boat’s directional stability.
What I mean by directional stability is how controlled a boat will track through the water. A directionally stable craft will hold a steady course with little input from the helmsman. A directionally unstable one will change directions on its own, often without warning and can be difficult to steer.
Probably the most important feature of a well-balanced kayak is a properly designed hull. The overall length of craft, as well as how much rocker the hull has (hull curvature from bow to stern) both play very important roles in regards to directional stability, but so does cargo placement, specifically, how and where this weight is distributed throughout the hull.
Typically in a small craft such as a kayak, the paddler makes up most of the cargo weight. And in well designed kayaks, the seating position should allow the boat to sit relatively level in the water, allowing it to track through the water in a controlled manner. So it’s important to know that having a seat too far forward or too far aft will alter the way the boat handles.
An unbalanced kayak with too much weight forward will have a bow that rides too deeply in the water and a stern that rides too high. In a bow-heavy boat, the bow will effectively act as a keel, biting deeply into the water, thereby reducing the sideways sliding motion of the bow. At the same time, the stern will loose it’s keel-like effect and slide sideways through the water too easily. Patti and I call this action “bow-keeling”.
While a limited amount of bow keeling can be beneficial in a sailing kayak by allowing the bow to track to windward more efficiently, too much weight forward can make the kayak want to “weather-cock” or turn into the wind on its own, requiring near constant corrective strokes to stay on course. Anyone who has been in one of these boats knows that they can be frustratingly difficult to steer. Once a directional change is initiated either by paddle stroke or hull steering, the stern will want to slide out toward the outside of the turn, requiring a quick corrective stroke to bring it back in line. Then, typically, the corrective stroke will cause the stern to slide back in the opposite direction, past the desired position, and require another corrective stroke. You see where this is going.
On the other side of the scale, an unbalanced kayak with too much weight in the stern will have its own control issues. In this case the bow will ride high above the water, allowing it to slide sideways, and the stern will sit too deep, acting like the keel. Though a stern-heavy kayak can be difficult to steer, it is usually easier to deal with. The two main control problems with boats having overly heavy sterns are, a difficulty in making tight turns due to the stern tracking too well, and a situation where the boat is constantly wanting to turn downwind because the bow is sliding away too easily.
So… how does one correct an unbalanced kayak?
Shifting cargo either fore or aft is an easy way to do it. Also if the kayak has an adjustable seat, sliding the seat either fore or aft can be a quick fix.
The next thing to try is adding weight to a compartment in the boat. Since it’s generally desirable to keep a boat as light as possible, the position of weight, as well as the type of weight used should be considered.
By positioning the weight as close to the bow or stern as possible, one can minimize the amount of weight needed.
As for what kind of weight to use, a good option is to add safety gear such as: dry clothing (in a dry bag), a first aid kit, a water bottle, food, a kayak repair kit, etc. Being prepared for emergencies is always smart. And while basic safety gear should always be onboard, another option is to add water weight. Water is desirable not only because it is dense and requires very little space, but perhaps more importantly it remains neutrally buoyant when submerged. Added benefits include being able to rinse the salt off at the end of the day, and even drink it if need be.
Patti and I sometimes correct for a bow-heavy boat by adding a small solar shower (basically a water bag with a plastic shower head attached to it) to the aft compartment, and placing it as far back in the hull as possible.
Below is a list of three common symptoms of an unbalanced kayak and how to fix them.
1) The kayak is tracking poorly and difficult to steer, especially when going off the wind (downwind). It may be bow-heavy. Try lightening the bow by shifting gear aft, shifting the seat aft, and/or adding weight to the stern compartment.
2) The kayak is constantly wanting to turn up into the wind. Again, it may be bow-heavy. Try lightening the bow by shifting gear aft, shifting the seat aft, and/or adding weight to the stern compartment.
3) The kayak is constantly wanting to turn downwind. It may be stern-heavy. Try lightening the stern by shifting gear forward, shifting the seat forward, and/or adding weight to the bow.
4) The kayak turns sluggishly, tracks like an arrow while traveling directly downwind, and may also be difficult to turn into the wind. Again, it may be stern-heavy. Try lightening the stern by shifting gear forward, shifting the seat forward, and/or adding weight to the bow.
Finally, it should be noted that some boats are just not well designed and will have poor handling characteristics no matter how you balance them. Even though balancing is always desirable, and will likely improve the overall handling, let’s face it, adding all the cream and sugar in the world into a bad cup of instant coffee will not miraculously change it into a fresh cup of gourmet java.
That said, if you have one of these instant coffee kayaks you can always add a rudder to improve the handling. Rudders can often compensate for severely unbalanced boats and greatly improve their directional control, but they too can have their issues. More about rudders in the next post.
I hope this information proves useful.
Please feel free to subscribe to this blog if you would like to receive e-mail notifications of new posts.
September 24th, 2015 by David
Here is a fun little video I put it together just to get my feet wet using a new editing software (Final Cut Pro X).
A simple enough edit, though I did need to add some image stabilization. As you can imagine it can be a bit challenging to hold the camera still while sailing (and smiling!) at the same time.
Patti is seen here sailing rudderless with the leeboards in perfect balance, nicely trimmed, with tell-tales flying. Just cruising in the groove!
She is sailing her 1.4m² with the genoa on her Tahe, Reval Mini LC (490cm x 54cm beam). And I’m filming (in her wind shadow) riding my Tahe, Ocean Spirit, also with a 1.4/genoa combination. The location is the bayside of Cudjoe Key and we’re crossing Kemp Channel, heading out toward the Content Keys.
One of the amazing things about the Lower Key’s backcountry is the scarcity of boats. Primarily it’s due to the vast amounts of shallow water and unmarked channels. You normally just see a few flats fishing guides and locals who know the water well enough to feel comfortable out there. If you look closely during the beginning of the clip you can see a flats skiff off to the right slowing down to check us out.
What a day! Perfectly steady twelve knots out of the NE, extra long beam reaches, and amazingly fun rides.
This is Kayak Sailing!
October 14th, 2014 by David
These ultra-high density, waterproof, foam mounting cradles give support to the cross tube as well as do a fine job of holding the main body tube on the center-line of a peaked, or shaped foredeck.
The Y40 foam is much better than the gray, Minicell foam commonly found in outfitting shops, mainly because it provides superior support. It can also be easily shaped with a sharp knife and sand paper for a custom finish.
These mounting cradles work well on many skin-on-frame boats where drilling holes for mounting hardware is not a viable option. They also work on a variety of hard shell boats with either peaked or domed foredecks, and in a situations where the rig needs to be made level, or lifted over deck hardware.
They can be quite useful for sailing borrowed or rented boats, and we’ve found them ideal for doing water trials with the under-the-hull strap, since the cradles help keep the rig from tilting.
There is a semi-circular groove cut into the top of the main cradle to accept the cross tube. There is also a flat channel on both the main and front cradle to accept the main body tube.
To install them, simply bend the included piece of wire over the section of foredeck where you want the cradle is to sit. Trace the shape of the wire on the cradle at the desired height, and cut with a sharp kitchen knife, razor, or band saw (if you have access to one). It’s really that easy.
The Y40 foam is a little more expensive than Minicell, but in our minds it’s well worth it. It’s quite a bit denser, provides much better support, and is easier to shape to a smooth finish.
We are now offering these on the website! Please feel free to contact us. 🙂
October 3rd, 2014 by David
Wow! thanks to all of you, we’ve had a very busy season. It’s thrilling to help so many people get into paddle-sailing!
Finally! we are glad to have a little free time to spend on the blog. Between building rigs, answering e-mails, and of course feeding our ravenous kayak-sailing addiction, our blog posts and website updates have been sadly neglected. Now that the days are getting shorter and the water is starting to cool here, we are beginning to have some more free time.
Tomorrow I’ll be posting a article on “Aleutian Island Paddles and Paddle-Sailing” that you may find interesting.
Anyway, just wanted to say Hi, and it’s great to be back!
Fair Winds and Happy Sailing!
May 15th, 2012 by David
Springtime has finally arrived in the Northern Hemisphere! Even though it has been a relatively mild La Nina Winter in Oregon, with some spectacularly sunny days mixed in with the normal clouds and misty rain of our wet season, we welcome the sun and warmth with open arms.
It has been quite a while since my last blog post so I will do my best to fill you in on what we have been up to.
Patti’s truck with Spring back orders ready to ship
Patti and I have been hard at work answering e-mails and building sailing rigs for kind people all over the world. We thank each and every one of you for your support. People are starting to find out about us!
On the weekends and after work we’ve been trying to squeeze in as much paddle-sailing as possible.
Orchard in bloom
You may not know that the sail loft is located in the lower half of an old farm house. We rent the house from a local orchardist and live upstairs. The place is surrounded by thirty beautiful acres of pear trees, and for a few weeks each Spring the blossoms transport us into a magical wonderland of cottony beauty. We enjoy this time of year very much. As an added bonus, the loft is only a few minutes from a terrific launch site on the Columbia River.
Patti and I have been having fun paddle-sailing in the Columbia. Our new skin boats are a real pleasure to sail.
For some reason Springtime seems to activate an instinctual fishing gene in some people. I’m not sure why, but the vernal change has this effect on me as well. On Saturday, while Patti dug up soil in our food garden, I felt compelled to head up to our local mountain lake for some trolling.
This small but lovely body of water holds a healthy population of rainbow and native bull trout, both of which respond well to trolled flies.
One of the tricks to trolling under sail is being able to control ones boat speed. It’s often easiest to regulate the speed of trolled baits while sailing to windward. By turning a boat up-wind and sailing on a very close reach, the boat speed will decrease. To pull the bait faster, one just needs to bear off the wind until the desired speed is reached. For trolling on a beam reach, a simple adjustment to the main sheet is often all that is required. The sheet may need to be let all the way out in order to keep the boats speed slow enough for trolling. I find that sheeting the sail all the way in, and effectively stalling the foil, can also be a good way to reduce speed, especially if heading down wind. This “stall” technique goes against most sailboat racer’s instincts, but for fishing, especially for slower fresh water fish, a slow speed is often needed.
Can you see the nest?
Saturday was an absolutely beautiful day with a clear sky and unseasonably mild temperature. One of the attributes of this little lake is an audible purity that results from a total absence of motorized craft. The only sounds that I could hear was the gentle swish my paddle blade dipping into the water, the occasional trout splashing on the surface, and a chirping song of ospreys (fish hawks). I could clearly hear what sounded like two baby ospreys calling from a nest high in a tree on the west bank. It seems that some ambitious bird lover had somehow climbed to the top of this incredibly tall tree and nailed together a wooden nesting platform for them.
What a relaxing day. There was one tense moment though. It happened just after I hooked a fish. It’s funny how crazy things seem to happen at the moment of hook up. I can remember several occasions while flats fishing in the Keys, when a hungry shark would apear as soon as I hooked into a big fish. And then there was the time my pants fell down while fighting a big bluefish on Long Island, but that’s a story for another time. Anyway, back to Saturday. Where was I, oh yeah, so I turned the boat into the wind and had just started reeling in this nice little trout when, with the corner of my eye, I saw momma osprey diving down from a nearby tree top with her wings folded back and talons extended, aiming for my fish! In a moment of heightened awareness I thought, oh no! she is going to take off with the fish! I immediately called out in an alarming yell, YAAH! YAAH!, in an attempt to break her concentration. At the very same moment I was trying to push away the thought of trying to reel in a fish hovering several meters above my head. Luckily, the scare tactic worked and she broke off her dive at the last possible moment. Whew.. That was too close. The fish came to the boat quickly and I released it back into the clear blue depths. Needless to say we were both relieved.
After a leisurely drive home I arrived to find Patti covered head to toe in soil with a big smile on her face.
Thanks for taking the time to read this post.
By the way, we plan on taking some fun high wind paddle-sailing videos this season and maybe even some paddle-sailing instructional videos, so stay tuned. And, please feel free to subscribe to this blog if you haven’t done so already. There is a subscription link in the right hand column.
December 26th, 2011 by David
Just thought that you might like to see a couple of pics of Patti’s newly redesigned boat.
It weighs about 35 lbs (15.9 Kg) complete with Kayaksailor rig and paddle!
These shots were taken on the winter solstice. It was unseasonably warm and a beautiful day to be out on the water.
No wind for sailing, but what a sweet setup!
Wishing you all the best this holiday season!
David and Patti
November 3rd, 2011 by David
In an act of spontaneity, Patti and I took a drive to the coast. Every now and again we need to get our gills wet in the salt water. There is something about the sea that helps us feel connected. Grounded so to speak, except for without the ground. ;D
The Oregon coastline is a notoriously rough place for small craft with few protected bays and harbors to escape the pounding surf. There are a few though. This day we decided to explore a protected place called Netarts Bay. I’s just a few miles south of the town of Tillamook.
What a glorious Autumn day! We arrived and immediately set out to find a good launching spot. One was found just inside the mouth of the bay and since the tide was just beginning to ebb and a strong outbound current was building, we decided to work against the current into the bay instead of heading out to the mouth. Tidal rips can be amazingly strong here in the Pacific Northwest and a thorough respect for them is essential for safe navigation.
We are always hoping for good wind and today looked perfect. But, as luck would have it, as soon as the boats were slid into the water the breeze died off almost completely, Oh well.. We always have the paddle. Actually, we really love paddling, especially when the water is flat calm and has a mirror finish on it. Paddle-sailing just has a special place in our hearts.
The boats glided silently in the clear water. Scallops could be seen on the bottom and occasionally small fish spooked from the gently swaying eel grass beds as we passed overhead. A variety of diving ducks and sea lions performed their disappearing acts around us and all was quiet except for a distant rumble of surf and the occasional call of a gull.
It was truly a delightful afternoon and we are happy to share it with you. Hope you enjoy the video.
October 23rd, 2011 by David
Several savvy paddle-sailors are utilizing marine rail mount and accessory mount hardware to attach their Kayaksailors.
Some of the notable features of these mounts are that they can be found in many marine stores, offer a convenient quick release option, and are designed to withstand the rigors of the marine environment.
Here is an example of a Rail/Bimini mount:
Ron Waclawik shares these photos of his Prion touring kayak outfitted with stainless steel rail and bimini mounting hardware. He purchased them online from marinepartsdepot.com
Quick release pins make for easy removal.
The mount raises the rig up for convenient access to the storage hatch.
Here is a view of the mounts without the rig.
Note the safety lanyard for the release pin
Care should always be taken when drilling into the bottom of the main body tube. It’s important to avoid hitting the thru hull pulley or the mast car bungee with the drill bit. The forward mount can often be positioned farther aft to avoid the pulley and a drill bit spacer can be utilized to limit the drill bit penetration.
Below is a good example of a marine accessory mount. These are often used to attach fishing rod holders and electronic equipment to boats.
Trevor Lowe, owner of Yakattack NZ Ltd. in Auckland, New Zealand shares these photos of his personal boat outfitted with marine accessory mounts from Railblaza.
Here is a view of the cross tube mount.
For the front he added an aluminum channel for the main body tube to rest in.
It’s a technical and sophisticated looking mount,
and also has a clean look when removed.
If you have any photos of your own Kayaksailor mount that you would like to share, please send them!
Happy paddle-sailing. 🙂
August 31st, 2011 by David
Recently, our friends Debbie and Keith twisted our arms and dragged us out of the loft to do some camping. We took our sails and boats and headed up to a beautiful mountain lake in the Cascade range of Washington State named Lake Wenachee. It’s been so incredibly windy on the Columbia River lately that we thought it would be a good opportunity to get away, test our prototype headsail, and enjoy the company of friends. These are some photos from the trip. Hope you enjoy.
We took our folding Pakboats, strapped them up to the racks, and started driving.
We traversed through the beautiful, hot, high desert prairie of of Eastern Washington State’s Yakima Valley before entering back into the cool Cascades.
Keith and Debbie, who arrived a day early, found a fabulous waterfront campsite complete with a small beach for the boats!
As our luck would have it, a frontal system pushed in from the Pacific and brought some moisture.
A surreal procession of cottony clouds caressed the mountain sides and reflected their beauty on the lake.
It’s mesmerizing and peaceful the way our thoughts seem to melt into the water.
It is really important to dress for the water temperature. This lake is crystal clear and very cold. We suited up and set out to explore the lake.
We popped up the sails every now and again when a breeze was felt, but mostly propelled ourselves by paddle.
Isn’t it funny how the farther away from civilization we get, the nicer the scenery. Hmmm… Maybe there is something to reflect on here.
It sure is nice to paddle on glassy water. After sailing in the extreme winds of the Gorge, the silence of stillness is wonderful and a little odd at the same time.
What a beautiful afternoon for a sail.
Back at the camp Charlee Girl and Debbie communicate with each other in a special way .
A small boat on a lake
allows us to take
a break from the push and the shove…
Sails filled with wind
and the company of friends
take us to places we love.
June 7th, 2011 by David
Leeboard control rod attachment
While sailing a friends kayak the other day, I discovered something very cool. His rig was mounted a bit close to me and I found my paddle blade knocking into the leeboard control rods every now and again. It wasn’t a big deal until I slid the paddle blade between the control rod and the gunwale on one particular forward stroke and it took an awkward maneuver to remove the trapped paddle blade. Now for the cool part, I sat there in the cockpit pondering the situation when it hit me, attach the control rod from the underside of the leeboard head!
View from the cockpit
This effectively lowers the leeboard control rods and allows them to run flush against the hull. They are now completely out of the way. Wow, sometimes the answers are so simple. I love it! The only thing that takes a little getting used to is that the leeboard controls are reversed, meaning to lower the leeboard, one must now push on the control rod instead of pulling on it. I really like this new rigging technique and urge you to give it a try.
June 7th, 2011 by David
“The creation of something new is not accomplished by the intellect but by the play instinct acting from inner necessity. The creative mind plays with the objects it loves.” (Carl Jung)
Creativity is something that we all have. This precious gift is little used by some and more highly developed in others. Kayak-sailors are quite creative, so are young children for that matter. Maybe this explains our immaturity, always wanting to go paddle-sailing instead of doing chores. Kidding aside, OK maybe I’m not kidding, I’m always amazed at how creative and clever people are when it comes to developing mounting systems for their rigs.
People enjoy creating their own mounts. Whether for aesthetics, functionality, or both, the variety of systems is truly impressive. The Kayaksailor fits many boats right out of the box, just strap it on and you are good to go, but some boats can use a little help. Interesting foredeck shapes, prominent hatch covers, fishing gear, tall cockpit coamings, are all possible reasons why one would build a custom mount.
Probably the most common mounting aid is the cross tube block. They are constructed from a variety of materials but most often from high density foam or wood. Cross tube blocks are typically used to help secure the rig on a peaked or scooped (concave surface from bow to cockpit) foredeck, but are also often used to raise the rig in order to clear deck gear or hatch covers. They can be used to level a rig or to raise the aft end of a rig to help open space beneath the boom for increased paddle efficiency when using large faced paddle blades.
The yellow one above I made myself from a small scrap piece of 2×4 pine that was laying around the garage. The bottom shape was determined by bending a wire coat hanger over the top of the foredeck. Using this wire as a template, a line was drawn on the side of the block and a jig saw was used to cut the bottom shape. The top has a groove, made by a router, for the cross tube to sit in. A Velcro strap could have been used instead to hold the cross tube in place. A little sand paper and some yellow paint gave it a nice finish that matched the boat.
Check out these beautiful mounting blocks made by Timothy Dunlap in Maryland. He attached the front block from below.
Some Kayaksailor enthusiasts like to make custom mounting brackets for their rig. Below, is a beautiful example of this style of mount made by Kimo Hogan in Calfornia for his Wilderness Systems Tarpon 12. The cross tube is held in place with an aluminum cap and machine screws, eliminating the need for cam-lock buckles and cinch straps. These brackets are made from machined aluminum, but I have seen some made from both wood and plastic. The front of the main body tube can also be held in a bracket. Check out this extremely cool front bracket decorated with wings that came off a 1937 Hudson Teraplane. Now that’s super Creative!
Custom mounts can also be made for folding craft. Here is a nice example of a clean mounting system for a Folbot Aleut, made by Gary G. from Massachusetts. He uses a longitudinal support to keep the rig supported slightly above the foredeck. The rig is held to the support with Velcro and D-ring patches are used instead of pad-eyes for securing the mounting straps to the hull.
Below is a very clever mount for a folder that Gerald Grace from Klepper America developed for securing the rig to the forward cockpit coaming of the Klepper. It’s unique cantilever design definitely shows thought and creativity.
Seeing creativity in action is truly inspiring, and these are just a very small sample of the cool mounts people have come up with. Now that your play instinct is stimulated, imagine yourself creating a custom mount for your own boat. Picture it ….What materials would you use?.. What would it look like?.. When you finish making it, send a photo or two. We would love to see it!
Fair winds and happy sailing!
June 7th, 2011 by David
Winter sailing here in Oregon is somewhat limited due to the cold. Even in dry suits it can be chilly.
So, I decided to put together a short video to remind us of summer sailing.
This movie shows Patti, myself and Mark Hall from Delta Kayaks, performing sea trials with the Kayaksailor 1.4m² and Mark’s own Delta 15.5.
We spent a glorious afternoon filming last summer at Pitt Lake near Mark’s home in Vancouver, British Columbia. There is something about sailing near large mountains that really appeals to me. Perhaps it comes from spending a lifetime of sailing in places that were, let’s say….. geologically compromised.
As you probably already know from watching our instructional videos, we recommend attaching the rig with the under-the-hull strap and some packaging tape for doing the sea trials. You can see the tape and strap in some of the shots.
The sailing was spectacular, what a nice hull/sail combination. The boat is comfortable, stable and maneuverable, a real treat to sail. She is very fast for her size and seems to move through the water effortlessly. There is also that prominent eye-catching sheer line, which in my mind adds to her visual appeal.
Hope that you enjoy watching the video.